Radiological Sciences Laboratory Internship Projects

Research Experience for Undergradutes (REU)

Applications accepted February 1-April 1, 2019

2019 RSL Undergraduate Research Summer Internship Program

Click HERE to view 2018 REU Program Highlights

Program Requirements:

This is a 10-week program starting June 24 to August 30, 2019 (40 hours per week). Students are expected to participate for the duration of the program - exceptions will be granted at the discretion of the faculty mentor. If you need to be away for part of the time, you should coordinate (in advance) with your faculty mentor. Students are also required to present their research by participating in an end-of-term poster session and complete a program questionnaire.

How to apply:

  1. Review the available REU projects for 2019.
  2.  Contact the faculty mentor listed in each posting to learn more about each project.
  3. APPLY HERE-->*APPLY ONLINE (link active until April 1, 2019)
  4. If you have any questions about the application or the logistics of the REU program, email

*Prime Candidates will be Stanford Undergrads.  Selected students will receive a stipend of $7,500 for the 10-week (40 hours per week) summer session of full-time research work.

  *Tips for the Application

  1. STEP 1: Before you fill out the application, review the available projects and contact the faculty mentor(s) listed to discuss your interest and qualifications. You are welcome to contact more any number of mentors, however, please limit your application to no more than 3 projects.
  2. STEP 2:  Have the following at hand when you are ready to apply:
  • Current transcript (unoffical okay) and resume. Upload your resume and transcript  as PDF documents only. The documents should be entitled, "Last name, First name_Transcript" and "Last name, First name_Resume".
  • Coursework you have taken and any research experience and/or applicable skills you have  related to your project choice.
  • Names and emails for 3 academic references.
  • A 200-500 word essay on your interest in this project and how this relates to your current and future academic ambitions. Prepare your answers in a separate document. After you complete the essay question, fill out the application. It will be easier to copy and paste your answers.
  •      ***Please note that if you start the form and you have to go back and fill in required fields, you must upload the attachment(s) again. If the form was not correctly filled out, the attachment will disappear when the form is reloaded. Once the application is submitted, changes cannot be made.

Program Highlights

RSL is offering the following enrichment opportunities to our 2019 Summer Interns. 

Students will be given time away from lab work:

  1. to learn about differing imaging modalities through RSL's unique lecture series
  2. to have lunch with RSL professors (free for interns!) 
  3. to develop scientific presentation skills and more at specialized mentoring sessions


Faculty Mentor: Jeremy Dahl, PhD

Internship Mentor: Rehman Ali

Internship Positions: 1 position available, undergraduate

Status: Available

Type of Laboratory Research: Dry lab

Our laboratory develops novel imaging algorithms and systems based on ultrasound.  Projects in our lab consist of novel beamforming algorithms to reduce image noise and improve overall image quality, development of high-sensitivity flow algorithms for the detection of small vessels in the placenta and neonatal brain, developement of speed of sound estimation techniques for improved image quality and quantification of disease, ultrasound molecular imaging for the early detection of cancer, ultrasound-guided drug delivery, fabrication of novel intravascular ultrasound transducers to perform radiation force imaging, and low-cost 3D imaging based on augmentation of 2D ultrasound systems.  The makeup of our laboratory personnel include engineers and physicists, and we collaborate extensively with molecular and cancer biologists, chemists, and clinicians.


We are currently developing techniques using pulse-echo ultrasound to measure the speed of sound of tissue.  Because the speed of sound is directly correlated with the fat concentration in the tissue, we aim to use this technology to measure steatosis of the liver in the diagnosis of Non-alcoholic Fatty Liver Disease (NAFLD).  Typical tasks involved in this project include (1) simulations of ultrasound fields and wave propagation, (2) experimental utilizing ultrasound systems to acquire raw ultrasound data from various media, (3) coding, post-processing , and tomographic image reconstruction using the raw ultrasound data to obtain sound speed estimates.

Required Skills:

Those best suited for our REU project are highly motivated and are very willing to learn new topics.  The project involves activities that are most familiar to electrical and biomedical engineers, however any highly motivated individual is welcome to apply.

Contact: Jeremy Dahl at 

APPLY: open Feb 1, 2019

Faculty Mentor: Jeremy Dahl, PhD

Internship Mentor: Carl Herickhoff, PhD + IMMERS group

Internship Positions: 1 position available, undergraduate

Status: FILLED

Type of Laboratory Research: Dry lab

Title: Augmented-Reality 3D Ultrasound Integration for Interventional Guidance

The Dahl lab develops ultrasound imaging technologies, from new beamforming algorithms to novel device designs (see, and the IMMERS group enables medical applications of augmented-reality (AR) to solve real challenges in healthcare (see

Project Overview: This project involves 3D reconstruction and augmented-reality (AR) visualization of ultrasound image volumes using a low-cost sensor-enabled probe. The project will have two major phases: the first phase involves calibration (of the trajectory measured by the low-cost sensors with that measured by a high-precision OptiTrack) and exporting and verifying reconstructed 3D image volumes; the second phase involves integrating the data stream into an augmented-reality display (Microsoft HoloLens or Magic Leap One) for interactive, real-time visualization of live-acquired ultrasound in 3D—which will be a powerful tool for interventional procedure guidance.

Required Skills: some proficiency at coding (C/C++ primarily); any experience with OpenGL, Matlab, handling multiple data streams, and AR/VR tools (e.g., Unity) would be a plus.

Contact: Carl Herickhoff at

Faculty Mentor: Adam Wang, PhD

Internship Mentor: Adam Wang, PhD

Internship Positions: 1 position available, undergraduate

Status: Available

Type of Laboratory Research: Dry lab

My group develops technologies for advanced x-ray and CT imaging, including novel system design, model-based image reconstruction, spectral imaging, and radiation transport methods. We develop these technologies in the Zeego Lab (a robotic C-arm that supports interventional imaging, animal studies, and more) and the Tabletop X-Ray CT Lab (for prototyping novel systems, custom geometries, and phantom experiments). We also have access to clinical systems, large-scale computational resources, and 3D printing.


The REU project will help us develop computational and visualization tools for understanding scattered dose in an interventional radiology environment. Clinicians routinely use x-ray imaging such as fluoroscopy and cone-beam CT, which exposes them to scattered radiation. Currently, there are few tools to monitor and display their real-time exposure to radiation. In this project, the student will perform Monte Carlo simulation of x-ray transport, use real-time dosimeters to verify the simulations, and create displays of the radiation distribution (“heat map”) with mixed/augmented reality (e.g., Hololens).

Required skills:

Seeking highly motivated students enthusiastic about research. Suitable for students with EE, BioE, Physics, CS, or similar backgrounds. Familiarity with Matlab, C++ programming languages.

Contact: Adam Wang at

APPLY: open Feb 1, 2019

Faculty Mentor: Daniel Spielman, PhD

Internship Mentor: Daniel Spielman, TBN

Internship Position: 1 position available, Undergraduates only

STATUS: Available

Type of Laboratory Research:  Dry lab


Title: Magnetic resonance methods for measuring brain energy metabolism and oxidative stress.

Synopsis: Beyond anatomy, magnetic resonance imaging (MRI) and spectroscopy (MRS) provide unique opportunities for assessing metabolism within the body.   You will be joining a multidisciplinary research team with expertise spanning physics, electrical engineering, biochemistry, and clinical sciences, to help develop novel acquisition and analysis tools for assessing critical in vivo processes.  The specific project is the development of new data analysis methods and machine learning tools for the improved measurement of energy metabolism and oxidative stress in the human brain.  Primary applications of this work include brain tumor diagnosis, treatment monitoring, and prediction of response to therapy, and improved understanding and treatment of neurologic conditions including traumatic brain injury, Alzheimer's disease, schizophrenia, and autism. 

Required Skills:

 Passion for research and willingness to take on new challenges

 Programming skills, e.g. Matlab

Contact: Dan Spielman at

Apply: open Feb 1, 2019

Faculty Mentor: Daniel Ennis, Ph.D.

Internship Mentor: T.B.D.

Internship Positions: 2 positions available, undergraduate only

Status: 1 FILLED

Type of Laboratory Research: Dry lab

The Cardiac Magnetic Resonance (CMR) Group is led by Dr. Ennis in the Department of Radiology at Stanford University. His team develops translational cardiac and cardiovascular MRI techniques to improve clinical diagnosis. Major research projects focus on: 1) Characterizing cardiac MRI biomarkers to detect the cardiomyopathy associated with Duchenne Muscular Dystrophy; 2) Developing MRI and 3D printing methods to estimate changes in heart stiffness; 3) Developing MRI methods that  validate  blood flow measurements using 3D printed constructs. 

Project titles: 

1) Develop and refine image processing methods for detecting heart disease in Duchenne Muscular Dystrophy.

2) Develop methods for 3D printing soft materials, then test their material stiffness using MRI.

3) Develop methods for 3D printing synthetic blood vessels, then measure blood flow using MRI.

Required Skills: Experience in building/making/crafting. An interest in image processing using computer programming (Matlab or Python). Curiosity, motivation, and problem-solving. An interest in cardiovascular physiology, bioengineering, and medical imaging.

Contact:  Daniel Ennis at

More information about the group is here:

Faculty Mentor: Kim Butts Pauly, PhD

Internship Mentor: Kim Butts Pauly, PhD 

Internship Positions: 1 position available, Stanford undergraduate

Status: Available

Type of Laboratory Research: Dry lab

Our lab studies novel therapies of focused ultrasound, a versatile technology with many applications, including treating neurological diseases and cancer. We use image guidance to better plan, monitor, and evaluate treatment efficacy as well as to  understand basic science mechanisms. By leveraging our own lab's scientific and engineering expertise and working in collaboration with other labs, our goal is to improve these focused ultrasound therapies as they become more commonly used in the clinic.

Title: Focused Ultraound/KBP Lab


The project is to develop computational methods for simulating ultrasound transmission across the skull. One possibility is a machine learning project where we compare CT images of the skull to the measured intensity and phase of the ultrasound transmitted across that skull. 

Required Skills:
Matlab and programming skills.

Contact Kim Butts Pauly at

Faculty Mentor: Jennifer McNab, Ph.D. 

Internship Mentor: Jennifer McNab, Ph.D., Christoph Leuze, Ph.D.

Internship Positions: 1 position, undergraduate level

Type of Laboratory Research: Dry lab or combination of wet and dry lab


Title: Developing Next Generation Neuronavigation Technology

Our mission is to develop magnetic resonance imaging (MRI) techniques that probe human brain tissue microstructure. This requires new MRI contrast mechanisms, strategic encoding and reconstruction schemes, physiological monitoring, brain tissue modeling and validation. Applications of these methods include neuronavigation, neurosurgical planning and the development of improved biomarkers for brain development, degeneration, disease and injury. In this project we will develop visualization techniques of MRI data using a see-through mixed reality display. MRI data will be processed and analyzed to extract relevant information such as functional or structural networks. The different types of MRI scans such as structural MRI, diffusion MRI and fMRI will then be visualized on the see-through display. 

Contact: Jennifer McNab at

Faculty Mentor: Gary Glover, PhD
Internship Mentor: Patricia Lan

Internship Positions: 1 position available, Undergraduates only

Status: Available

Type of Laboratory Research: Dry lab

Title:  Developing fMRI targets for HIFU ablative therapy in patients with essential tremor.

Synopsis: Patients with essential tremor have debilitating involuntary hyperactive motor movements, but can often be treated using (non-invasive) high intensity focused ultrasound (HiFU) to ablate the ventral intermediate thalamic nucleus (VIM) thought to be responsible for the tremor.  The VIM is a small deep-brain region that is presently targeted by anatomic measurements. During the treatment, ablation efficacy is currently monitored by visual observation of tremor intensity, and the target location is adjusted  during treatment to improve the ablative reduction in tremor.  During this process, other parts of the thalamus responsible for speech and motor kinesis can be inadvertently damaged.

In this project, we will optimize an fMRI technique to more accurately target the VIM using an accelerometer to monitor the patient’s tremor during a pre-therapy scan.  The fMRI target locations will be compared with the conventional targets and the final HIFU locations after the treatment to see whether the fMRI target would have been closer. The development will involve scanning normal volunteers to optimize the fMRI protocols and analysis methods, then scanning patients pre-treatment to determine the target for HiFU treatment, and finally analyzing the accuracy of the fMRI targets relative to the outcome after treatment with the conventional treatment plan.

Required Skills: Facility with fMRI scanning desired but not essential, basic signal processing and familiarity with Matlab.


Faculty Mentor: Garry Gold, MD
Internship Mentor: Garry Gold, Feliks Kogan

Internship Positions: multiple positions available, Undergraduates only


Type of Laboratory Research: Combination of wet and dry lab

The JOINT group works on orthopedic imaging, on projects designed to detect osteoarthritis, measure biomechanics, and improve diagnosis.  Our work includes basic physics and engineering, image acquisition, processing and analysis and testing methods in human subjects.  We use many computational methods including image analysis and machine learning.


1)Segmentation of tissue, to aid in training of neural networks for classification

2) Study the effects of loading and exercise in human subjects

3) Better characterizes sports injuries and musculoskeletal disease with imaging

4) Developing improved imaging tools for joints, including weight bearing CT and PET-MR.

Required Skills:

Basic Biology, Physics, and Chemistry.  Computer skills are desired, such as Horos or Osirix.  Pre-medical students are welcome.

Contact: Garry Gold (

Faculty Mentor:  Bruce Daniel MD

Internship Mentor:  Bruce Daniel MD, Brian Hargreaves Ph.D., Steffi Perkins MSBME

Internship Positions:  1 position available, undergraduate.

Status: FILLED

Type of laboratory research:  Dry lab.

Overview of lab work:   The IMMERS lab is the experimental arm of the Incubator for Medical Mixed and Extended Reality at Stanford.  Mixed-reality, sometimes called “Augmented-Reality” refers to the creation of virtual digital objects and content that are inserted into the real-world.  Our lab focuses on using state of the art head-mounted systems, including Microsoft HoloLens, and Magic Leap One, to bring 3D content based on medical imaging data into the workspace of physicians and patients, with the goal of improving patient care through better diagnosis, planning and execution of medical procedures.  From brain to breast to lungs to joints, we are leveraging the unique power of mixed-reality to tackle a wide variety of clinical scenarios.  Our approach centers on close collaboration between engineers, scientists, and expert clinicians and doctors.  We are team and often work together supporting one anothers projects.

Title: IMMERS Lab

Project:   The overarching goal of the project is to get facile with creating and evaluating medical mixed reality technologies.  One particular use case that we need help with is the evaluation of the anatomy of organs being considered for donation for transplant.   We want to know if 3D visualization can help surgeons make better plans for transplant surgery.  But there are a number of other projects spanning from basic mixed reality alignment problems through intraoperative use that REU students can potential join as well, depending on skills and interest.

Required Skills: Curiosity, altruism, friendliness, integrity and self-motivation are essential.  Basic familiarity with computers is a must.  Experience with the Unity programming environment and C# programming would help, but are not essential.  

Contact:  Bruce Daniel MD.  Professor of Radiology

Faculty Mentor: Michael Moseley, PhD, Greg Zaharchuk, MD
Internship Mentor: Michael Moseley, Greg Zaharchuk

Internship Positions: 1 position available, Undergraduate only


Type of Laboratory Research: Dry lab

The Center for Advanced Functional Neuroimaging (CAFN), directed by Greg Zaharchuk, MD, PhD and Michael Moseley, PhD, is part of Radiological Sciences Lab in the Department of Radiology at Stanford University's School of Medicine. We develop novel Magnetic Resonance Imaging (MRI) techniques to better understand human brain functions, delineate brain structures, and diagnose brain diseases. We drive key clinical areas of neuroimaging focusing on disease processes in stroke, brain tumors, and other cerebrovascular diseases using tissue perfusion mapping (PWI), diffusion MRI (DWI), as well as new fields of mapping the brain connectivity: diffusion tensor imaging (DTI), susceptibility-weighted MRI (SWI), and Quantitative Susceptibility Mapping (QSM). CAFN also develops and uses high-resolution quantitative diffusion tensors and perfusion maps to explore and map complex brain structure and function in active mental tasking, revealing new key findings in the developing and aging brain function for blood flow, tissue integrity, and cognition.

CAFN collaborates with researchers from the Stanford Stroke Center, Departments of Neurology, Neurosurgery, Psychiatry and Psychology, UC Berkeley, Lucille Packard Children’s Hospital, Palo Alto VA Medical Center and other research institutions to discover new ways of approaching the brain’s most complex problems. We also use many computational methods including Deep Learning and machine learning for improved neuroimaging.

Projects: Analysis of clinical brain images for segmentation of tissue and training of Deep Learning and neural networks for disease characterization.

Required Skills:

Matlab and/or python programming.

Contact: Mike Moseley or Greg Zaharchuk


Faculty Mentor: Brian Hargreaves, PhD
Internship Mentor: Brian Hargreaves, TBN

Internship Positions: Multiple positions available,  Undergraduates only

STATUS:  contact Faculty mentor for 2019 update

Type of Laboratory Research: Combination of wet and dry lab

The Body MRI group works on abdominal imaging, breast imaging, and orthopedic imaging, on projects designed to detect cancer, nerve injuries, osteoarthritis, and other abnormalities.  We also work on imaging methods to guide treatments, both for focused ultrasound surgery and more recently for augmented-reality guided surgery.  Our work includes basic physics and engineering, image acquisition, processing and analysis and testing methods in human subjects.  We use many computational methods including optimization and machine learning.


1)Segmentation of tissue, to aid in training of neural networks for classification

2) Develop/characterize neural-network-based image reconstruction

3) Microsoft HoloLens programming of prototypes for aligning images to people

4) Developing a pipeline for automatic image processing.

Required Skills:

Matlab and/or python programming.  Linear algebra and ideally Fourier Transform theory are very helpful  (EE263 and 261 if Stanford)

Contact: Brian Hargreaves

Faculty Mentor: Michael Zeineh, MD, PhD
Internship Mentor: Michael Zeineh, MD, PhD

Internship Positions: 1 position available, Undergraduate only

STATUS:  contact Faculty mentor for 2019 update

Type of Laboratory Research: Combination of wet and dry lab

Dr. Zeineh's Lab focuses on Translational Neuroimaging. The goal is to advance Neuroradiology to gain insight into diseases that are just beyond our reach. Specific disease entities include Alzheimer’s disease, chronic fatigue syndrome, sports-related mild traumatic brain injury/concussion, and epilepsy.

Methodologies used in living humans include include 7T and 3T human MRI, with an emphasize on iron imaging and microstructure (e.g. DTI), using advanced techniques such as quantitative susceptibility mapping and prospective motion correction

Methodologies used in human ex vivo tissues and mice in vivo and ex vivo include small-bore ultra high resolution 7T MRI, micro-CT, and correlation of both of these with histologic techniques. Histology techniques included traditional histology for neurodegenerative proteinopathies (e.g. amyloid), CLARITY and polarized light microscopy for connectivity, x-ray microscopy and electron microscopy for iron.

Required skills: In addition to an earnest desire to try new/challenging things, a subset of the following:



      histology skills (sectioning, staining, microscopy)


Contact: Michael Zeineh