Sarah Bohndiek

Publication Details

• Characterization and testing of LAS: A prototype 'large area sensor' with performance characteristics suitable for medical imaging applications

  Bohndiek SE, Blue A, Cabello J, Clark AT, Guerrini N, Evans PM, Harris EJ, Konstantinidis A, Maneuski D, Osmond J, O'Shea V, Speller RD, Turchetta R, Wells K, Zin H, Allinson NM. IEEE Transactions on Nuclear Science. 2009; 56 (5): 5280498

  The Large Area Sensor (LAS) is a 1350 × 1350 array of active pixels on a 40m pitch fabricated in a 0.35m CMOS process. Stitching technology is employed to achieve an area of 5.4 cm × 5.4 cm. The sensor includes 'regions of reset', whereby three different integration times can be set on the array to achieve a large imaging range for static scenes. Characterization of the noise performance included temporal and fixed pattern sources. LAS was found to have a read noise of 62 e-, a full well capacity of 61 × 10 3 e- and a conversion gain of 5 e- per digital number (DN). The fixed pattern noise (FPN) was evaluated at half saturation; within a single stitched section of the array, column-to-column FPN was found to be 0.6%, while the pixel-to-pixel FPN was 3%. Both FPN sources were found to be gain related and could be corrected via flat fielding. Based on the results of characterization, LAS was coupled to a structured CsI:Tl scintillator and included in an X-ray diffraction system developed for the analysis of breast biopsy samples. Data acquired with plastic test objects agrees with that acquired by a previous prototype sensor. It is demonstrated that an imaging output range of 140 dB can be achieved using integration times of 0.1 ms to record the transmitted X-ray beam and 2.3 s to record the lower intensity scattered radiation.